[bt_section layout=”boxed” top_spaced=”not-spaced” bottom_spaced=”not-spaced” skin=”inherit” full_screen=”no” divider=”no” back_image=”” back_video=”” video_settings=”” parallax=”” parallax_offset=”” el_id=”” el_class=”” el_style=””][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/2″][bt_header superheadline=”” headline=”Theta Consult certifies the Information Security Management System (ISMS) according to the ISO 27001 standard ” headline_size=”small” dash=”bottom” subheadline=”” el_class=”” el_style=””][/bt_header][/bt_column][bt_column width=”1/2″][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/2″][bt_text]

Hooray, we already have a SUSI Certificate! From 2019 Theta Consult Ltd. is working on the priority goal Development, implementation and Certification of Information Security Management System (ISMS), but for various reasons, this still did not happen.

From the beginning of 2020, at the insistence of the top management, more decisive steps were taken and with the help of a consulting company and the mobilization of its own staff, things worked out.

The new system includes both the general characteristics (processes) of a Management System (MS) and very specific requirements (controls) for Information Security (IS), and thus the whole ISMS system is formed.

A team of three specialists (Responsible for the three systems: ISMS, OHSAS and QMS) works under pressure (due to the short deadlines), but responsibly and selflessly. So, the collective mind and efforts gave the desired result!

At the end of March, a certification organization conducted an audit (remote) and Theta Consult received a good assessment of what was done, and in early May received the desired Certificate of Conformity of SUSI with the requirements of BDS EN ISO / IEC 27001: 2017 .

Congratulations on your success! Congratulations to the company and staff!

[/bt_text][/bt_column][bt_column width=”1/2″][bt_image image=”1998″ caption_text=”” size=”” url=”” el_class=”” el_style=””][/bt_image][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][/bt_section]

[bt_section][bt_row][bt_column width=”1/2″][bt_text]

On 2, 3 and 4 October 2020 in the building of the Faculty of Physics on Sofia University “St. Cl. Ohridski ”the 48th National Conference on Physics Education was held on the topic“ Nuclear Physics and Energy in Physics Education ”. The conference was opened by the President of the Union of Physicists Prof. Al. Draishu, and the chairman of the Organizing Committee for the conference was Prof. I. Lalov. Congratulatory addresses were from the Ministry of Education and Science, BAS, NRA, Union of Scientists and others.

[/bt_text][/bt_column][bt_column width=”1/2″][bt_image image=”2139″ caption_text=”Откриването” size=”” url=”http://www.thetaconsult.com/wp-content/uploads/2020/10/NKF-2.jpg” el_class=”” el_style=””][/bt_image][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”not-spaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/2″][bt_image image=”2138″ caption_text=”Органа за контрол на Тита-Консулт” size=”” url=”http://www.thetaconsult.com/wp-content/uploads/2020/10/NKF-1.jpg” el_class=”” el_style=””][/bt_image][bt_hr top_spaced=”topSmallSpaced” bottom_spaced=”bottomSmallSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_text]

The Head of the Control Body Ivaylo Pastuhov gave a presentation in the Higher Education section on Modern applications of nuclear physics to ensure safety and security, acquainting the audience with the characteristics and capabilities of one of the systems available to the Authority – gamma camera POLARIS-H^TM 2.0.

[/bt_text][bt_image image=”2140″ caption_text=”Представяне на Polaris-H 2.0″ size=”” url=”http://www.thetaconsult.com/wp-content/uploads/2020/10/NKF-3.jpg” el_class=”” el_style=””][/bt_image][/bt_column][bt_column width=”1/2″][bt_text]

Theta Consult Ltd., represented through its Control Body, was among the co-organizers and participants in this conference. The members of the Control Body prepared a stand in the lobby of the faculty with advertising materials for the activity of the company, for the suppliers of various equipment, specialized literature, as well as demonstration of some used devices / systems for radiation control.

[/bt_text][bt_image image=”2141″ caption_text=”Щандът на Тита-Консулт” size=”” url=”http://www.thetaconsult.com/wp-content/uploads/2020/10/NKF-4.jpg” el_class=”” el_style=””][/bt_image][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”bottomSemiSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_text]

The conference was attended by teachers and university professors from schools across the country. The meetings were divided into sections Higher and Secondary Education, there was a Youth Scientific Session and a Poster Exhibition, as well as Invited Papers with interesting titles. The closing of the conference took place in the Regional Historical Museum of Sofia (former Central Bath), with awards and a talk on the history of the city.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSmallSpaced” bottom_spaced=”bottomSmallSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][/bt_section]

[bt_section layout=”boxed” top_spaced=”not-spaced” bottom_spaced=”not-spaced” skin=”inherit” full_screen=”no” divider=”no” back_image=”” back_video=”” video_settings=”” parallax=”” parallax_offset=”” el_id=”” el_class=”” el_style=””][bt_row][bt_column width=”1/1″][bt_header superheadline=”Theta Consult” offers headline=”Neutron System for Moisture Measurement” headline_size=”medium” dash=”no” subheadline=”” el_class=”” el_style=””][/bt_header][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/2″][bt_text]

Moisture content measurement system LB 350, manufactured by Berthold, is mainly used in applications where conventional sensor technologies are not applicable because of the conductivity or the chemical properties of the material being measured. “For continuous humidity measurement of solids, the LB 350 uses the neutron deceleration method. It uses the effect of neutron scattering as a result of the interaction of high-energy (fast) neutrons with the nuclei of hydrogen atoms in the material being measured”, the Process control department explained.

The measurement system is based on a source emitting a cloud of fast neutrons. After their interaction with the water molecules in the material being measured, the decelerated neutrons are measured with a special detector that is sensitive to only slow neutrons. Since the number of slow neutrons corresponds to the hydrogen content, the neutron technology is a reliable technical solution for measuring the moisture content of a product.

 “Neutron technology does not depend on the chemical or physical bonds between the water molecules in the measured volume”, commented Mariela Mladenova, a specialist in the field. “It is not affected by temperature, pressure, conductivity, color, pH value, electrolyte content or different particle sizes. Through it, even the content of deep-frozen water can be accurately estimated” the company experts added.

Measurement through the LB 350 system is accomplished by installing a bunker probe inside the tank or a surface probe against the wall of the vessel with the product being measured, depending on the specifics of the application.

[/bt_text][/bt_column][bt_column width=”1/2″][bt_image image=”1915″ caption_text=”” size=”” url=”” el_class=”” el_style=””][/bt_image][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/2″][bt_image image=”1914″ caption_text=”” size=”” url=”” el_class=”” el_style=””][/bt_image][/bt_column][bt_column width=”1/2″][bt_hr top_spaced=”topExtraSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_text]

SURFACE PROBE

The surface probe is mounted directly on the outer wall of a bunker. It is capable to irradiate up to 20 mm thick steel walls. However, the best measuring accuracy is achieved by using Berthold’s specifically designed mounting frame, which is installed in an opening in the wall. The mounting frame is extremely robust due to the wear-resistant ceramics surface and allows for a quick and easy installation of the probe.

BUNKER PROBE

The probe is mounted in a dip pipe made from steel or ceramics. Typically, this dip pipe is inserted in the outlet section of the bunker, so that the probe is fully surrounded by bulk material. Due to the optimum position of the probe inside the material flow, a highly representative measurement is achieved.

The LB350 system has proven it’s reliability and extremely accurate operation in multiple hard applications, including moisture measurement of sand int concrete or glass industry, as well as humidity determination of coke and sinter mixtures.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”bottomSemiSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”bottomSemiSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][/bt_section]

[bt_section][bt_row][bt_column width=”1/1″][bt_header superheadline=”” headline=”Theta Consult recertified it’s management systems” headline_size=”medium” dash=”no” subheadline=”” el_class=”” el_style=””][/bt_header][/bt_column][/bt_row][bt_row][/bt_row][bt_row][bt_column width=”1/2″][bt_hr top_spaced=”topSmallSpaced” bottom_spaced=”bottomSmallSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_text]

Theta Consult received new recertification certificates for Quality Measurement Systems and Occupational and health safety, implemented by the company.

“The new certificates are the final result of a big amount of work done and successful audit by “Sertification” JSC. We ae extremely proud with those certificates, because we executed one of our priority objectives and we are continuing with development of an integrated management system ”, pointed Ilza Andreeva, who is in charge of Management systems in the company.

This year’s certification was done, following the most recent standard revisions. About Occupational and Health Safety that is BDS ISO 45001:2018, about Quality Measurement Certification that is BDS EN ISO 9001:2015.

[/bt_text][/bt_column][bt_column width=”1/2″][bt_image image=”1820″ caption_text=”” size=”” url=”” el_class=”” el_style=””][/bt_image][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/2″][bt_image image=”1821″ caption_text=”” size=”” url=”” el_class=”” el_style=””][/bt_image][/bt_column][bt_column width=”1/2″][bt_hr top_spaced=”topSmallSpaced” bottom_spaced=”bottomSmallSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_text]

The arrange of the quality management system includes:

• Design/development, manufacturing of a product/offering a service, consultancies and expert evaluations, complete engineering and project management in the field of radiation control, radiation protection, process control and security systems.
• Radiation parameters measurement of working, surrounding and living environment as well as samples from them.
• Transportation of radioactive substances and operation working with Ionized Radiation Sources.
• Supply, commissioning, technical maintenance and repair of radiation and dosimetry control , process control devices, including devices containing Ionizing Radiation Sources, X-Ray scanners for people, vehicles and baggage; security devices and systems, access control and video-surveillance, communication equipment etc.
• Soil and precipitate treatment, terrain reclamation etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][/bt_section]

[bt_section layout=”boxed” top_spaced=”not-spaced” bottom_spaced=”not-spaced” skin=”inherit” full_screen=”no” divider=”no” back_image=”1487″ back_video=”” video_settings=”” parallax=”” parallax_offset=”” el_id=”” el_class=”” el_style=””][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSpaced” bottom_spaced=”bottomSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_hr top_spaced=”topSpaced” bottom_spaced=”bottomSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_hr top_spaced=”topSpaced” bottom_spaced=”bottomSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_hr top_spaced=”topSpaced” bottom_spaced=”bottomSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_hr top_spaced=”topSpaced” bottom_spaced=”bottomSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_hr top_spaced=”topSpaced” bottom_spaced=”bottomSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_hr top_spaced=”topSpaced” bottom_spaced=”bottomSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][/bt_section][bt_section][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”bottomSemiSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_header superheadline=”” headline=”CONTROL BODY WITH EXTENDED RANGE AND NEW CERTIFICATE” headline_size=”medium” dash=”no” subheadline=”” el_class=”” el_style=””][/bt_header][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_hr top_spaced=”topSmallSpaced” bottom_spaced=”bottomSmallSpaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][/bt_column][/bt_row][bt_row][bt_column width=”1/2″][bt_hr top_spaced=”topSemiSpaced” bottom_spaced=”not-spaced” transparent_border=”noBorder” el_class=”” el_style=””][/bt_hr][bt_text]

On November 28^th and 29^th, representatives of EA BAS (Bulgarian Accreditation Service) did Routine supervision and Extension of the accreditation range of Theta Consult’s Type C radiation control body

There are 2 new control parameters:

• Dose from Gamma, X-ray and neutron rays (important parameter in case of radiation control medical facilities, which diagnose and perform treatments of various diseases)

• Activity of Gamma radionuclides in various materials (important parameter for better analysis of samples from various controlled objects, mainly industrial)

The extension of the range was provoked by the market search. We hope, that this way we will meet the needs of more customers.

In the end of March 2020 the radiation control body, received it’s new certificate by BAS and is currently expecting it’s new customers.

More information about the Radiation control body you can find here, for some additional questions, please don’t hesitate to contact us!

[/bt_text][/bt_column][bt_column width=”1/2″][bt_image image=”1927″ caption_text=”” size=”” url=”” el_class=”” el_style=””][/bt_image][/bt_column][/bt_row][/bt_section]